Product News

PEPPERL+FUCHS HART Loop Converter KFD2-HLC-Ex1.D.4S

1-channel isolated barrier

24 V DC supply (Power Rail)

HART field device input with transmitter power supply

Usable as signal splitter (1 input and several outputs)

4 relay contact outputs (NO contact)

3 analog outputs 4 mA ... 20 mA

Sink and source mode output

Configurable by keypad

Datasheet excerpt: Technical data of  KFD2-HLC-Ex1.D.4S

General specifications

Signal type: Analog input

Supply

Connection: Power Rail or terminals 23+, 24-

Rated voltage: 19 ... 30 V DC

Rated current: approx. 140 mA at 24 V DC

Power dissipation: 2.7 W

Power consumption: 3.3 W

HART signal channels (intrinsically safe)

Conformity: HART field device input (revision 5 to 7)

Interface

Programming interface programming socket

Input

Connection side field side

Connection terminals 1, 2, 3, 4, 5, 6

Open circuit voltage/short-circuit current typ. 24 V / 28 mA

Input resistance 250 Ω , 5 % (terminals 2, 3 and with jumper on 5, 6)

Available voltage ≥ 15.5 V at 20 mA, short-circuit protected

Output

Connection side control side

Connection output I: terminals 10, 11, output II: terminals 11, 12, output III: terminals 16, 17, output IV: terminals 17, 18

output V: terminals 7, 8, 9, output VI: terminals 13, 14, 15, output VII: terminals 19, 20, 21

Output I, II, III, IV

Output signal relay and LED yellow

Mechanical life 107 switching cycles

Energized/De-energized delay approx. 20 ms / approx. 20 ms

Mechanical specifications

Degree of protection IP20

Connection screw terminals

Mass 300 g

Dimensions 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) , housing type C3

Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001