Schneider LTMR08CFM Motor controller LTMR TeSys T - 100..240 V AC 8 A for CANopen New & Original with very competitive price and One year Warranty
New & Original
LTMR08CFM
Please contact us for more information.
- Product description
- Contact us
Schneider LTMR08CFM Motor controller LTMR TeSys T - 100..240 V AC 8 A for CANopen
New & Original with very competitive price and One year Warranty
TeSys T is a smart motor management system. When associated with a short circuit protection device and a contactor,
the device provides full motor monitoring, control and protection for electrical motors.
| range | TeSys | |
|---|---|---|
| product name | TeSys T | |
| device short name | LTMR | |
| product or component type | Motor controller | |
| device application | Equipment monitoring and control | |
| measurement current | 0.4…8 A | |
| [Us] rated supply voltage | 100...240 V AC 50/60 Hz | |
| current consumption | 8...62.8 mA | |
| supply voltage limits | 93.5…264 V AC | |
| communication port protocol | CANopen | |
| bus type | CANopen ISO 1198 interface, addressing 1...127, transmission rate 10...1000 kbit/s, SUB-D 9 with 4 twisted shielded pairs cable CANopen ISO 1198 interface, addressing 1...127, transmission rate 10...1000 kbit/s, terminal block with 4 twisted shielded pairs cable |
| [Ui] rated insulation voltage | 690 V conforming to EN/IEC 60947-1 690 V conforming to CSA C22.2 No 14 690 V conforming to UL 508 | |
|---|---|---|
| [Uimp] rated impulse withstand voltage | 4 kV supply, inputs and outputs conforming to EN/IEC 60947-4-1 6 kV current or voltage measurement circuit conforming to EN/IEC 60947-4-1 0.8 kV communication circuit conforming to EN/IEC 60947-4-1 | |
| short-circuit withstand | 100 kA conforming to EN/IEC 60947-4-1 | |
| associated fuse rating | 4 A gG for output 0.5 A gG for control circuit | |
| protection type | Power factor variation Reverse polarity protection Thermal protection Phase failure Load fluctuation Overload Phase unbalance Thermal overload protection Overload (long time) Locked rotor Earth-leakage protection | |
| network and machine diagnosis type | Event recording Trip history information Phase fault and earth fault trip counters Trip context information Waiting time after overload tripping Remaining operating time before overload tripping Running hours counter/operating time Motor control command recording Starting current and time Fault recording | |
| logic input number | 6 | |
| input current | 3.1 mA at 100 V 7.5 mA at 240 V | |
| current state 0 guaranteed | Logic input: 0...40 V and <= 15 mA for 25 ms | |
| current state 1 guaranteed | Logic input: 79...264 V and >= 2 mA for 25 ms | |
| maximum output switching frequency | 2 Hz | |
| load current | 5 A at 250 V AC for logic output 5 A at 30 V DC for logic output | |
| permissible power | 480 VA (AC-15), Ie = 2 A, 500000 cycles (output) 30 W (DC-13), Ie = 1.25 A, 500000 cycles (output) | |
| maximum operating rate | 1800 cyc/h | |
| contacts type and composition | 1 NO + 1 NC fault signal 3 NO | |
| metering type | Temperature Phase current I1, I2, I3 RMS Imbalance current Average current Iavg Earth-fault current | |
| measurement accuracy | 5...15 % earth fault current internal measurement (for current > 0.1 A) 1 % voltage (100...830 V) 3 % power factor (cos φ > 0.6) 5 % earth fault current external measurement (< 5 % or 0.01 A) +/- 30 min/year internal clock 0,02 temperature 1 % current 5 % active and reactive power |
Related Products
-
Brand New SCHNEIDER analog isolated high level output module BMEAHO0412 Original In Stock
LTMR08CFM Read more -
Brand New SCHNEIDER analog isolated high level input module BMEAHI0812 Original In Stock
LTMR08CFM Read more -
Ready To Ship Original Schneider ATV930D55N4C Variable speed drive, Altivar Process ATV900, ATV930, 55 kW, 400/480 V, w/o braking unit, IP21
LTMR08CFM Read more -
In Stock Original Schneider VW3A3627 Profinet communication module
LTMR08CFM Read more