Products

Phoenix Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 New & Original with very competitive price and One year Warranty

New & Original
PLC-RSC- 12DC/ 1IC/ACT - 1078800
Phoenix Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 New & Original with very competitive price and One year Warranty
Please contact us for more information.

Phoenix Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800




PLC-INTERFACE for high switch-on currents, consisting of PLC-BSC.../1 IC/ACT basic terminal block with push-in connection and plug-in miniature relay, 

for mounting on DIN rail NS 35/7,5, max. switch-on current up to 130 A, 1 N/O contact, input voltage 12 V DC


Key Commercial Data

Orderkey1078800
Packing unit1
Catalog pagePage 382 (C-5-2019)
GTIN4055626794532
Custom tariff number85364190


Dimensions

Width14 mm
Height80 mm
Depth94 mm


Ambient conditions

Ambient temperature (operation)-40 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Maximum altitude≤ 2000 m
Degree of protectionRT II (Relay)

IP20 (Relay base)

≥ IP54 ()


Coil side

Nominal input voltage UN12 V DC
Typical input current at UN33 mA
Typical response time8 ms
Typical release time10 ms
Coil voltage12 V DC
Protective circuitReverse polarity protection Polarity protection diode

Free-wheeling diode Damping diode
Operating voltage displayYellow LED
Power dissipation for nominal condition0.4 W


Contact side

Contact type1 N/O contact
Type of switch contactSingle contact
Contact materialAgSnO2
Maximum switching voltage250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage12 V (at 100 mA)
Min. switching current100 mA (at 12 V DC)
Maximum inrush current80 A (for 20 ms)

130 A (peak, at capacitive load, 230 V AC, 24 μF)
Limiting continuous current6 A

10 A (the value is permissible if both connections 13, both connections 14 and both connections BB are bridged)
Interrupting rating (ohmic load) max.144 W (at 24 V DC)

58 W (at 48 V DC)

48 W (at 60 V DC)

50 W (at 110 V DC)

80 W (at 220 V DC)

85 W (for 250 V DC)

1500 VA (for 250 V AC)
Interrupting rating (ohmic load) max. bridged240 W (for 24 V DC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.)

2500 VA (for 250 V AC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.)
Switching capacity min.1200 mW
Switching capacity2 A (at 24 V, DC13)

0.2 A (at 110 V, DC13)

0.2 A (at 250 V, DC13)

6 A (at 24 V, AC15)

6 A (at 120 V, AC15)

6 A (at 250 V, AC15)


General

Test voltage relay winding/relay contact4 kV AC (50 Hz, 1 min.)
Operating mode100% operating factor
Mechanical service life3x 107 cycles
Mounting positionany
Assembly instructionsIn rows with zero spacing


Connection data

Connection nameCoil side
Connection methodScrew connection
Stripping length8 mm
Screw threadM 3
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²

0.2 mm² ... 2.5 mm² (Single ferrule)

2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG26 ... 14


Connection data 2

Connection nameContact side
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²

0.2 mm² ... 2.5 mm² (Single ferrule)

2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG26 ... 14


tandards and Regulations

DesignationStandards/regulations
Standards/regulationsEN 50178

EN 61810-1
Rated insulation voltage250 V AC
Rated surge voltage6 kV
InsulationSafe isolation, reinforced insulation
Pollution degree2
Overvoltage categoryIII
Flammability rating according to UL 94V0


Copyright © 2019 Sunup (Wuhan) Industrial Equipment Co., Ltd. All Right Reserved.


Sunup (Wuhan) Industrial Equipment Co., Ltd is not an authorized reseller, agent or affiliate of any brand or manufacturer. All trademarks, brand names and logos whose products are sold on the website are used for identification purposes only and are registered trademarks of their respective owners, all rights reserved. The use of a trademark, brand name or product on our website does not imply that the company trademark or brand belongs to or endorses our website. All products are 100% original, genuine and legally purchased from authorized sources.