Phoenix Single relay - REL-MR- 24DC/21 - 2961105 New & Original with very competitive price and One year Warranty

New & Original
REL-MR- 24DC/21 - 2961105
Phoenix Single relay - REL-MR- 24DC/21 - 2961105 New & Original with very competitive price and One year Warranty
Please contact us for more information.

Phoenix Single relay - REL-MR- 24DC/21 - 2961105

Plug-in miniature power relay, with power contact, 1 PDT, input voltage 24 V DC

Key Commercial Data

Packing unit1 pc
Minimum order quantity10 pc
Catalog pagePage 284 (C-5-2019)
Weight per Piece (excluding packing)6.000 g
Custom tariff number85364190
Country of originCZ (Czech Republic)


Width5 mm
Height28 mm
Depth15 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 85 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Degree of protectionRT III

Coil side

Nominal input voltage UN24 V DC
Input voltage range in reference to UNsee diagram
Typical input current at UN7 mA
Typical response time5 ms
Typical release time2.5 ms
Coil resistance3390 Ω ±10 % (at 20 °C)
Power dissipation for nominal condition0.17 W

Contact side

Contact type1 PDT
Type of switch contactSingle contact
Contact materialAgSnO
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V (at 100 mA)
Min. switching current10 mA (at 12 V)
Maximum inrush current10 A (4 s)
Limiting continuous current6 A
Interrupting rating (ohmic load) max.140 W (at 24 V DC)

20 W (at 48 V DC)

18 W (at 60 V DC)

23 W (at 110 V DC)

40 W (at 220 V DC)

1500 VA (for 250 V AC)
Switching capacity2 A (at 24 V, DC13)

0.2 A (at 110 V, DC13)

0.1 A (at 220 V, DC13)

3 A (at 24 V, AC15)

3 A (at 120 V, AC15)

3 A (at 230 V, AC15)
Motor load according to UL 5081/4 HP, 240 - 277 V AC (N/O contact)

1/6 HP, 240 - 277 V AC (N/C contact)


Test voltage relay winding/relay contact4 kV AC (50 Hz, 1 min.)
Operating mode100% operating factor
Mechanical service life2x 107 cycles
Mounting positionany
Assembly instructionsIn rows with zero spacing

Connection data

Connection methodSolder connection

tandards and Regulations

Connection in acc. with standardCUL
Standards/regulationsIEC 60664

EN 50178

EN 61810-1
Pollution degree3
Overvoltage categoryIII

Copyright © 2019 Sunup (Wuhan) Industrial Equipment Co., Ltd. All Right Reserved.

Sunup (Wuhan) Industrial Equipment Co., Ltd is not an authorized reseller, agent or affiliate of any brand or manufacturer. All trademarks, brand names and logos whose products are sold on the website are used for identification purposes only and are registered trademarks of their respective owners, all rights reserved. The use of a trademark, brand name or product on our website does not imply that the company trademark or brand belongs to or endorses our website. All products are 100% original, genuine and legally purchased from authorized sources.