Products

ABB AX400 series AX466/11001 Single and dual input analyzers for low level conductivity discontinued 

The suggest update replacement is AWT420.A.1.A1.P1.P1.A1.E5-.A1.U1...M5

The AX400 series

AX400 analyzers incorporate the latest technology to provide highly reliable, flexible, feature-packed devices that satisfy a

diverse range of process monitoring and control applications. The complete range encompasses solutions for pH/Redox (ORP), 

conductivity and dissolved oxygen. AX46x analyzers enable continuous measurements of one or two pH or Redox (ORP) points with simultaneous local display

and retransmission. AX46x is used with glass, enamel and antimony pH electrodes and metal Redox sensors, providing measurements 

with exceptional accuracy and performance. AX400 series analyzers are available for either wall-/pipe- or panel-mounting and are rated to IP65.

Specification

pH/Redox (ORP) – AX460 and AX466

Inputs

• One or two* pH or mV inputs and solution earth

• One or two* temperature sensors

• Enables connection to glass or enamel pH and

reference sensors and Redox (ORP) sensors

Input resistance

• Glass >1 x 1013Ω

• Reference 1 x 1013Ω

Range

–2 to 16 pH or –1200 to +1200 mV

Minimum span

Any 2 pH span or 100 mV

Resolution

0.01 pH

Accuracy

0.01 pH

Temperature compensation modes

• Automatic or manual Nernstian compensation

– Range –10 to 200 °C (14 to 392 °F)

• Process solution compensation with configurable

coefficient

– Range –10 to 200 °C (14 to 392 °F)

adjustable –0.05 to 0.02 %/°C (–0.02 to 0.009 %/°F)

Temperature sensor

Programmable Pt100, Pt1000 or Balco 3kΩ

Calibration ranges

Check value (zero point)

0 to 14 pH

Slope

Between 40 and 105 % (low limit user configurable)

Electrode calibration modes

Calibration with auto-stability checking

• Automatic 1 or 2 point calibration selectable from:

– ABB

– DIN

– Merck

– NIST

– US Tech

• 2 x User-defined buffer tables for manual entry,

2-point calibration or one-point process calibration

*AX466 only

**Available if option board is fitted.

Conductivity – AX416 only

Range

Programmable 0 to 0.5 to 0 to 10,000 µS cm–1

(with various cell constants)

Minimum span

10 x cell constant

Maximum span

10,000 x cell constant

Units of measure

µS cm–1, µS m–1, mS cm–1, mS m–1, MΩ-cm and TDS

Accuracy

Better than ±0.01 % of span (0 to 100 µS cm–1)

Better than ±1 % of reading (10,000 µS cm–1)

Operating temperature range

–10 to 200 °C (14 to 392 °F)

Temperature compensation

–10 to 200 °C (14 to 392 °F)

Temperature coefficient

Programmable 0 to 5 %/°C and fixed temperature

compensation curves (programmable) for acids, neutral

salts and ammonia

Temperature sensor

Programmable Pt100 or Pt1000

Reference temperature

25 °C (77 °F)

Display

Type

Dual 5-digit, 7-segment backlit LCD

Information

16-character, single line dot-matrix

Energy-saving function

Backlit LCD configurable as ON or Auto-Off after 60 s

Logbook**

Electronic record of major process events

and calibration data

Real-time clock**

Records time for logbook and auto-manual functions

Specification

Mechanical data

Wall- / Pipe-mount versions

• IP65 (not evaluated under UL certification)

• Dimensions 192 mm high x 230 mm wide x 94 mm deep

(7.56 in. high x 9.06 in. wide x 3.7 in. deep)

• Weight 1 kg (2.2 lb.)

Panel-mount versions

• IP65 (front only)

• Dimensions 96 mm x 96 mm x 162 mm deep

(3.78 in. x 3.78 in. x 6.38 in. deep)

• Weight 0.6 kg (1.32 lb.)

Cable entry types

Standard 5 or 7 x M20 cable glands

North American 7 x knockouts suitable

for 1/2 in. Hubble gland

Power supply

Voltage requirements

• 100 to 240 V AC, 50 / 60 Hz (90 V min. to 264 V max. AC)

• 12 to 30 V DC

Power consumption

10 W

Insulation

Mains to earth (line to ground) 2 kV RMS

The AX400 series

AX410, AX411, AX416, AX450 and AX455

AX460, AX466 and AX416

Model No examples : 

AX410/10001

AX410/50001

AX410/100010/STD

AX411/10001

AX411/500010/STD

AX416/10001

AX460/10001+AP301 / 50030121

AX460/100010/STD

AX466/500010/STD

There have More items , all for 100% New & Original with very good discount , pls kindly contact with Chris directly to know more details information . 

Chris Fang 

Sales Engineer

Sunup (Wuhan) Import and Export Co., Ltd.

Add:7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan, China

Postal code:430015

M: + 86-15926376631(WhatsApp & Wechat) 

Skype: live:chris_61491

Email: chris@sunupauto.com

Web: https://www.sunup-automation.com