Products

SIEMENS Echomax XRS-5 Ultrasonic level measurement Process Instrumentation Level Measurement New & Original with very competitive price

New & Original
Echomax XRS-5 Series
SIEMENS Echomax XRS-5 Ultrasonic level measurement Process Instrumentation Level Measurement New & Original with very competitive price
Please contact us for more information.

SIEMENS Echomax XRS-5 Ultrasonic level measurement Process Instrumentation 

Level Measurement New & Original 

 

 

 

Echomax® XRS-5 ultrasonic transducer provides reliable, continuous level monitoring of liquids and slurries in narrow lift stations/ wet wells, flumes, 

weirs and filter beds using a beam angle of just 10° and a CSM rubber face. The XRS-5 is non-contacting with a measuring range from 0.3 to 8 m (1 to 26 ft). 

Advanced echo processing ensures reliable data even in conditions with obstructions, turbulence and foam. The hermetically sealed 

CSM rubber face and the PVDF copolymer enclosure are designed for maximum resistance to methane, salt water, 

caustics and harsh chemicals common to wastewater installations. With an IP68 degree of protection, 

this rugged sensor is fully submersible in the event of flood conditions. Use a submergence shield if full submergence is possible in the application. 

A submergence shield will maintain a high level reading output during submerged conditions.

 

The low-cost XRS-5 transducer is compatible with a full range of Siemens controllers, from a basic system for high/low alarm 

or simple pump control, up to advanced control systems with communications, telemetry and SCADA integration capabilities.

 

Overview

EchoMax XRS-5 ultrasonic transducer provides reliable, continuous level monitoring of liquids and slurries in narrow lift stations/wet wells, 

flumes, weirs and filter beds using a beam angle of just 10° and a CSM rubber face.

 

Benefits

  • Narrow beam angle of only 10°

  • Chemically resistant PVDF copolymer enclosure and CSM rubber face

  • Measuring range: 8 m (26 ft) for measurement of liquids and slurries

  • Fully submersible: IP68 degree of protection

  • Easy installation with 1" NPT or R 1" BSPT connection

 

Application

The XRS-5 is non-contacting with a measuring range from 0.3 to 8 m (1 to 26 ft). Advanced echo processing 

ensures reliable data even in conditions with obstructions, turbulence, and foam.

The hermetically sealed CSM rubber face and the PVDF copolymer enclosure are designed for maximum resistance 

to methane, salt water, caustics, and harsh chemicals common to wastewater installations. With an IP68 degree of 

protection, this rugged sensor is fully submersible in the event of flood conditions. Use a submergence shield if full 

submergence is possible in the application. A submergence shield will maintain a high level reading output during submerged conditions.

The low-cost XRS-5 transducer is compatible with a full range of Siemens controllers, from a basic system for high/low alarm or simple pump control, 

up to advanced control systems with communications, telemetry and SCADA integration capabilities.


Key Applications: wet wells, flumes, weirs, filter beds

 

Technical specifications

Mode of operation


Measuring principle

Ultrasonic transducer

Input


Measuring range

0.3 ... 8 m (1 ... 26 ft), dependent on application

Output


Frequency

44 kHz

Beam angle

10°

Accuracy


Temperature error

Compensated by integral temperature sensor

Rated operating conditions


Vessel pressure

Normal atmospheric pressure

Ambient Conditions


  • Ambient temperature

-20 ... +65 °C (-4 ... +149 ° F)

Design


Weight (approximate shipping weight of sensor with standard cable length)

1.2 kg (2.6 lb)

Material (enclosure)

PVDF copolymer enclosure and CSM face

Process connection

1" NPT [(Taper), ANSI/ASME B1.20.1] or R 1" [(BSPT), EN 10226]

Degree of protection

IP65/IP68

Cable connection

2-core shielded/twisted, 0.5 mm2 (20 AWG), PVC sheath

Cable (max. length)

  • 365 m (1 200 ft) with RG 62 A/U coaxial cable

  • 365 m (1 200 ft) with 2-core twisted pair, foil shield, 0.5 mm2
    (20 AWG), PVC sheath, only for MultiRanger 100/200

Options


Flange version

Factory flange with PTFE face for ASME, EN or JIS configuration

Submergence shield

For applications with flooding possible

Certificates and approvals

CE, RCM, KCC

CSA Class I, Div. 2, Groups A, B, C, D, Class II, Div. 1 Groups E, F, G

FM Class I, Zone 1, AEx m IIC, T6 Class II, III, Div. 1, Groups E, F, G T6

ATEX II 2GD / IECEx / INMETRO Ex mb IIC T6 Gb, Ex tb IIIC T85 °C Db


Copyright © 2019 Sunup (Wuhan) Industrial Equipment Co., Ltd. All Right Reserved.


Sunup (Wuhan) Industrial Equipment Co., Ltd is not an authorized reseller, agent or affiliate of any brand or manufacturer. All trademarks, brand names and logos whose products are sold on the website are used for identification purposes only and are registered trademarks of their respective owners, all rights reserved. The use of a trademark, brand name or product on our website does not imply that the company trademark or brand belongs to or endorses our website. All products are 100% original, genuine and legally purchased from authorized sources.