SIEMENS Hot Sale SITRANS LVL100 Process Instrumentation Level Measurement Point Level New & Original with very competitive price

New & Original

SITRANS LVL100 Series

Please contact us for more information.

SIEMENS SITRANS LVL100 Process Instrumentation

Level Measurement Point Level New & Original

SITRANS LVL100 is a compact vibrating level switch for use in liquid applications such as overflow, high,

low and demand applications, as well as pump protection. It is ideal for use in confined spaces.

SITRANS LVL100 is a compact level switch designed for industrial use in all areas of process technology and can be used with liquids and slurries.

With an insertion length of only 40 mm (1.57“), SITRANS LVL100 can be mounted in small pipes and confined space applications.

It is also virtually unaffected by the chemical and physical properties of the liquid.

The LVL100 can also be used in difficult conditions including turbulence, air bubbles, foam generation, buildup, or strong external vibration.

The tuning fork is piezoelectrically energized and vibrates at its mechanical resonance frequency of approximately 1200 Hz.

The vibration frequency changes when the tuning fork is covered by the medium.

This change is detected by the integrated oscillator and converted into a switching command.

The integrated electronics evaluate the level signal and output a switching signal, directly operating connected devices.

Key Applications: For use in liquids and slurries, for level measurement, overfill, and dry run protection.

Benefits

Proven vibrating level switch technology for liquids
Compact insertion length of 40 mm (1.57 inch) for confined space applications
Available starting at 1/2" threaded process connections
Fault monitoring for corrosion, loss of vibration, or line break to the piezo drive
Integrated test function to confirm correct operation

SITRANS LVL100 is a compact level switch designed for industrial use in all areas of process technology and

can be used for material detection with liquids and slurries. With an insertion length of only 40 mm (1.57 inch),

SITRANS LVL100 can be mounted in small pipes and confined space applications.

It is virtually unaffected by the chemical and physical properties of the liquid.

The LVL100 can be used in difficult conditions including turbulence, air bubbles, foam generation, buildup, or external vibration.

The tuning fork is piezoelectrically energized and vibrates at a mechanical resonance frequency of approximately 1 200 Hz.

The vibration frequency changes when the tuning fork is covered by the medium.

This change is detected by the integrated oscillator and converted into a switching command.

The integrated electronics evaluate the level signal and output a switching signal to connected devices.

Key Applications: for use in liquids and slurries, for level measurement, overfill, and dry run protection

Mode of operation
Measuring principle	Vibrating point level switch
Input
Measured variable	High and low and demand
Output
Output options	Contactless electronic switch Transistor output PNP
Measuring accuracy
Hysteresis	Approx. 2 mm (0.08 inch) with vertical installation
Switching delay	Approx. 500 ms (on/off)
Frequency	Approx. 1 100 Hz
Rated operating conditions
Installation conditions
Location	Indoor/outdoor
Ambient conditions
Ambient temperature	-40 ... +70 °C (-40 ... +158 °F)
Installation category	III
Pollution degree	2
Medium conditions
Temperature
Standard	-40 ... +100 °C (-40 ... +212 °F)
High temperature option	-40 ... +150 °C (-40 ... +302 °F)
Pressure (vessel)	-1 ... 64 bar g (-14.5 ... 928 psi g)
Density	0.7 ... 2.5 g/cm³ (0.025 ... 0.09 lb/in³)
Design
Material
Enclosure	316L and Plastic PEI
Tuning fork	316L (1.4404 or 1.4435)
Process connection (threaded)	316L (1.4404 or 1.4435)
Process seal	Klingersil C-4400
Process connection
Pipe thread, cylindrical (ISO 228 T1)	G ½" A, G ¾" A, or G 1" A
Pipe thread, tapered	½" NPT, ¾" NPT, or 1" NPT
Hygienic fittings	Bolting DN 40 PN 40
	Tri-clamp 1", 1½", 2" PN 10
Degree of protection	IP65/Type 4/NEMA 4 (with DIN 43650 valve plug), IP66/67 or IP68 (with M12 connector)
Conduit entry	1 x M12 [IP66/IP67 or IP68 (0.2 bar)]
Weight (housing)	250 g (9 oz)
Power supply
Supply voltage	20 ... 253 V AC, 50/60 Hz 20 ... 253 V DC
Power consumption	Max. 0.5 W
Certificates and approvals	Overfill protection (WHG) Shipping approvals