SIEMENS Hot Sale SITRANS TR320 Process Instrumentation Temperature Measurement New & Original with very competitive price and Warranty
- Product description
- Contact us
SIEMENS SITRANS TR320 Process Instrumentation Temperature Measurement
SITRANS TR320 is designed to support all common resistance thermometers and thermocouples.
It also evaluates resistance and millivolt signals. Setup is quick and easy with SIMATIC PDM or a handheld communicator.
Both temperature transmitters SITRANS TR320 and TR420 combine perfect measurement and intelligence for every temperature and condition.
The reliability of the SITRANS TR420 is exemplified by the dual sensor input with a 4-wire sensor connection and hot backup function.
In case of a sensor failure, the transmitter seamlessly switches to the second sensor allowing for continuous data recording without any loss.
Overview
2 wire temperature transmitter with HART communication interface
Enclosure for rail mounting
Universal input for virtually any type of temperature sensor
HART 7
Benefits
Compact design
Electrical isolation
Test terminals for ammeter
Diagnostics LED (green/red)
Input monitoring
Wire break and short-circuitSelf-monitoring
Configuration status stored in EEPROM
Expanded diagnostic functions, such as slave pointer, operating hours counter, etc.
Special characteristic
Electromagnetic compatibility according to DIN EN 61326 and NE21
SIL2/3 (with order note C20)
Application
SITRANS TR320 transmitters can be used in all sectors. Their compact design enables simple mounting on
standard DIN rails on-site in protective boxes or in control cabinets.
The following sensors/signal sources can be connected over their universal input module:
* Resistance thermometer (2-wire, 3-wire, 4-wire connection)
* Thermocouples
* Linear resistance, potentiometer and DC voltage sources
With HART communication interface:
The output signal is a load-independent direct current from 4 to 20 mA in accordance with the input characteristic,
superimposed by the digital HART signal.
Transmitters of the "intrinsically safe or Zone 2 increased safety" type of protection can be installed in hazardous areas.
The device meets the requirements of the EU Directive 2014/34/EU (ATEX), the FM and CSA regulations as well as other national approvals.
Function
With HART communication interface:
The SITRANS TR320 is configured via HART. The configuration can be carried out using a handheld communicator or, more conveniently,
with a HART modem and the SIMATIC PDM configuration software. The configuration data is then permanently stored in the non-volatile memory (EEPROM).
After correct connection of input and supply voltage, the transmitter outputs a temperature-linear output signal and the diagnostics LED is green.
In case of external errors, e.g. sensor short circuit or interruption, the LED flashes red; an internal error is indicated by a permanent red light.
An ammeter can be connected at any time for checking and plausibility via the test terminals.
The output current can be read without any interruption, or even without opening the current loop.
SITRANS P500
SITRANS P420
SITRANS P320
SITRANS P410
SITRANS P DS III
SITRANS P310
SITRANS P300
WirelessHART pressure transmitter SITRANS P280
SITRANS P200/P210/P220
SITRANS P Compact
SITRANS LH100
SITRANS LH300
SITRANS TH100
SITRANS TH200
SITRANS TH300
SITRANS TH400
SITRANS TH320/420
SITRANS TR200
SITRANS TR300
SITRANS TR320
SITRANS TR420
Related Products
-
In Stock Original SIEMENS 6GK5106-2BB00-2AC2 SCALANCE XC106-2, Unmanaged IE switch
TR320 Read more -
In Stock Original SIEMENS 6ES7414-5HM06-0AB0 SIMATIC S7-400H, CPU 414-5H, central processing unit
TR320 Read more -
In Stock Original SIEMENS 6ES7972-0BB42-0XA0 SIMATIC DP, Connection plug
TR320 Read more -
In Stock Original SIEMENS 6SL3100-0BE28-0AB0 SINAMICS S120 ACTIVE INTERFACE MODULE
TR320 Read more